hover animation preload

HP expands its Printer and PC recycling program
by Kelly in

HP Printer today announced the expansion of its "HP Planet Partners Program" to consumer and small business customers. Previously available only to its direct enterprise customers, the recycling program will allow consumers and small to medium businesses to drop off their broken and end-of-life HP-branded equipment at one of 10 locations around Australia for environmentally friendly disposal.

Accepted equipment includes broken and unused printers, computers, monitors and computer peripherals. These will be accepted in key locations in Australian capital cities, as well as the Gold Coast and Central Coast. HP says the initiative will allow the electronics manufacturer to reuse key materials like plastic and metal in new products.

There are some key differences between the enterprise program and the one for consumers and small businesses. Unlike the enterprise program, consumers and businesses are expected to drop off the equipment themselves, and only HP-branded equipment will be accepted. The program is free of charge, however.

"The environment is top of mind for consumers and businesses today," said HP South Pacific Environmental Manager Kok Wah Boey in a press statement. "HP believes in the shared responsibility of producers and customers in handling end-of-life products in an environmentally responsible way."

---------------------------------------------------------------------------------
www.iyogi.net - Technical Support You can Trust and Rely Upon
Subscribe now !
-----------------------------------------------------------------------------
The program's expansion to consumers and small businesses comes after HP trialled a one-off initiative at two Dick Smith (DSE) locations in Sydney recently. HP said the trial was a success, with consumers dropping off 3228kg of equipment over the course of a week.

HP already offers several recycling programs for specific products and consumables in Australia. Consumers and businesses can safely dispose of printer and multifunction ink cartridges and laser toners through Planet Ark's "Cartridges 4 Planet Ark" scheme, which is available in various retail locations around Australia. The environmental organisation also collates recycling initiative information at its Recycling Near You Web site. HP is also involved in Byteback, a free scheme in Victoria which collects and recycles component equipment, components and peripherals.
Comments (0)

How to connect a wired printer to wireless network using a wireless router
by Kelly in , , , ,

printer support
Connecting your inkjet printer to a wireless network will let you share the printer with many different computers without the hassle of tangled cables and connectors. Follow these steps make the connection.

Step 1
Check if your printer is network ready. Many newer models are designed to work on networks. Examine the documentation to see if your printer supports Wi-Fi (802.11x) or Bluetooth.

Step 2
Add network support to your printer. If your printer is not already wireless you can connect it to a wireless router using the RJ-45 Jack (it resembles a large telephone jack). You can also buy an expansion card that will add a jack or buy an external print server that will connect to the USB or parallel port.

Step 3
Connect your printer to the network. If your printer is not wired, you’ll have to connect it directly to your wireless router. Connect a networking cable from the RJ-45 Jack on the printer (or adapter) to the router. Plug it into any jack except the UPLINK. The printer should automatically connect to the network when turned on.

Step 4
Install printer drivers on all computers. Using the disc that came with the printer or drivers downloaded from the manufacturer, install the printer’s drivers onto each computer on the network.

Step 5
Print. You should be able to access the printer just like any other wireless device. Select the printer from the Print menu when you print.


Step 1
Install the printer. Set up the printer as normal on a machine that is already connected to the wireless network. Connect all necessary cables and install all necessary drivers.

Step 2
Open the printers and faxes folder. Click "Start," then "Control Panel," then "Printers and Other Hardware" and then "Printers and Faxes."

Step 3
Share your printer. Find the icon for the printer you just installed. Click the icon once and then select SHARE THIS PRINTER in the tasks pane on the left. Now, right click the icon, select properties and go to the SHARING tab. Click "Share Name," and then click "Okay."

Step 4
Connect to the printer. On the other computers within the network, open the control panel and click "Printers and Other Hardware." Select "Add a Printer."

Step 5
Select "Printer Connection." When prompted, select this option instead of the local printer. Find and select the printer you just installed and select it.

Step 6
Print as normal. Next time you print a page, send it to your networked printer.
Comments (1)

How to get the printer driver from the Lexmark CD?
by Kelly in , ,


You can use Add Printer Wizard (APW) and directly install the printer driver yourself.

To launch:
Start->Printers and Faxes->Add Printer (upper left)
Dialog:
1. Click Next
2. Choose Local Printer attached to this computer
3. Next
4. Choose the USB port (If you know the USB). Otherwise go back to to screen (step 2) and check automatically detect checkbox under the Local Printer option.
5. Next
6. Click Have disk and browse to the CD and look for something Win_2KXP folder with .inf files in it.

Then from there it will install the printer driver only. Don't worry about committing mistake. If you correctly chosen the USB port where you've connected the printer APW will only pickup the correct inf file.
Comments (4)